Discussion Locked

Motherboard confusion

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My motherboard is toast. I have an AMD Athlon 850Mhz with a K7 Pro ATX IR3 Mainboard, I think made by Micro Star International. I need to replace it but I know very little about computers. In shopping for a new board, I am now totally confused. What should I know in order to replace mine and where to shop?

12 replies

by rapidad

http://www.anandtech.com/
http://www.tomshardware.com
these two sites are the oldest and most reliable sources of info for motherboards and other hardware. Toms even has a book published by QUE that is very informative. Both sites have links to buying sources. Also on ebay there is a seller named darino (he used to be the owner of tccomputers till insight bought him out), I've probably bought twenty boards from him over the years and never had a problem.

by thechas

If this is the Slot A version of the K7 Pro (MS-6195), your choices for a replacement motherboard are very limited.

Personally, I would use this as an opportunity to upgrade to a Socket A motherboard.

I recommend ABIT and ASUS motherboard for AMD CPUs.
My next choice would be Shuttle and FIC.
This is based on boards that I have worked with.

Anyhow, the web site www.motherboards.org can assist you in comparing the features on different motherboards.

If you wish to re-use the Slot ACPU, you are limited to dealers that sell surplus and refurbished PC parts.
www.compgeeks.com
www.computersurplusoutlet.com
www.pcliquidator.com

Things to watch for;
Memory compatability
Is your CPU a "Thunderbird" or an Athlon Classic?
Case size. Micro ATX, or full size ATX
Power Supply, you may need a new power supply for many socket A motherboards. I use 300 Watt or larger supplies.

Things that I personally avoid:
Built-in anything; sound video modems NIC; all will cause you more problems than the money you will save. And, slow down your PC.

Older SDRAM socket A motherboards. If you are going to upgrade, spend a little extra, and switch to DDR ram.

Next, you need to be able to deal with installing device drivers as any different motherboard will need numerous new drivers.
Also, you need an ESD wrist strap and a clear work area to perform the swap.
Try and get a few ESD bags from a friend or local dealer to place your plug in cards into as you remove them.
While I would not recommend changing out a motherboard as a first time hardware task, if you are careful and READ the hardware manuals, you should be able to do it with a minimum of pain.
(Very few hardware upgrades go as smoothly as you hope.)HTH

Chas

by thechas

As I think about this, you may want to skip the new motherboard, and buy a "bare-bones" system.

At the prices some of these are selling for, it would be worth your while, and would simplify the task.

These systems vary in what is not included.So, look for one that has everything but the drives and plug-in cards that you wish to salvage from the old system.

Also, some web-tailers offer a service to assemble the CPU motherboard and RAM and test the assembly. This verifies that the parts all work together, and is one less problem for you.

Chas

by fenaikh

Hi

A motherboard is a physical baord in a computer that contains the computer's basic circuitry and components. On the typical motherboard, the circuitry is imprinted or affixed to the surface of a firm planar surface and usually manufactured in a single step. The most common motherboard design in desktop computers today is the AT, based on the IBM AT motherboard. A more recent motherboard specification, ATX, improves on the AT design. In both the AT and ATX designs, the computer components included in the motherboard are:

Motherboard type. (AT,ATX)
The CPU (What type and speed does it supports)
ChipSet (ROM) (What type and version and what does it support)
Memory (RAM) (What type, speed, and capacity does it supports)
basicinput/output system (BIOS) (What type,version and what does it support)
Expansion slot (HOw many and what type PCI, AGP , ISA ..)
Interconnecting circuitry
Floppy disk controller (1.4" )
Integrated Drive Electronics. (IDE,EIDE) (How many, what type,version and what does it support, Size of hard disk,)
Small Computer System Interface (SCSI) (How many, what type,version and what does it support, Size of hard disk, CD-ROM drive)
Ports (Serail, parallel, USB , PS2 mouse)
The electronic interface between the motherboard and the smaller boards or cards in the expansion slots is called the bus.(BUS) (What is the Speed of the BUS and what does it support)
Optional components can be added to a motherboard such as sound card, Display adapter, the Small Computer System Interface (SCSI), and others.On the otherhand other components can be added to a motherboard through its expansion slot such as moedm

Whwn you want to change your motherbard you have to conseder most if not all ofthese parts and what you have. I suggest concedring the purchase of a new system where conflict and compatiblity would not an issue.Not mentioning the trouble of installing it ....

by fenaikh

more info

MOTHERBOARD AND CHIPSET GUIDE
Last updated: 7/31/2002
Advice on Buying a Motherboard

http://www.duxcw.com/digest/guides/mb_chip/index.html

***Very Important NOTE *********
After you copy the URL a space or a %20 maybe gets inserted in the URL when you paste it into your browser. Delete any spaces or such characters from the URL for the page to be loaded.
***Very Important NOTE *********

by franjent79

Well, that's not hard to do. All you need to look for is a Motherboard that can use that cpu. ABit.com is a good site for mother boards. If you have a Fryz close to you, you should check there. If you don't know what you're looking for just ask they'll help. If you want to buy it online. Just go to www.pricewatch.com. That site have everything you'll need. I'm sure you'll find a board there. Good Luck. Have Fun.

This discussion is closed to new replies.