Discussion Locked
0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm in the process of building a computer and I just bought an Asus P4T533-C Audio LAN Rambus Memory motherboard. I has a built in sound card with an S/PDIF output to be hooked up to a home receiver system. What is the name of the wire I need to go from the S/PDIF to my coaxial adapter on the back of my surround receiver? Thanks.
1 reply
by thechas
I was unable to find the specifics of the S/PDIF connector on the module at ASUS's web site.
If your receiver only has the coaxial connector, you need to have a coaxial (RCA) connector at the PC end.
If the PC end only has an optical cable connection, you need to either have an optical input on the receiver, or find an optical to coaxial converter to add in-between the PC and the receiver.
Check your local BestBuy, Circuit City, or Radio Shack store for compatable cables.
If you canbring in a picture of the connectors at both ends (manuals) they will be better able to assist you in selecting the correct cable.
Chas
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies