2 replies
by thechas
The problem with Dell and other "name brand" PCs is that they do not always use "standard" components.
If the bracket slots for plug-in cards are about 1/2 normal height, you have a NLX style motherboard.
Even if the card slots accept full height cards, you could still have a custom motherboard.
A few things to check:
Does the I/O shield look like to be a standard ATX layout, position, and size?
Is the power connector a standard ATX connector?
Is the motherboard a micro ATX (just a couple of slots for cards)?
Is there room and holes for a larger motherboard.
Personally, I would spend the extra $30 for a low end ATX case and get the motherboard you really want.
Chas
by pierrejamme
I have to agree with TheChas last statement. I am working on a 2350 for a friend, it only has a 200watt power supply. You probably have the integrated Intel video and audio so will need that in new board also or cards. It only has two DDR PC2100 memory slots for a max of 2@512MB or 1GB. I haven't opened it up, but it is a minitower and probably is ATX, but by the time you buy power supply (because 200w isn't sufficient) your'e better off with a new case.
My two cents worth on this entry level computer.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending