Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
hello there i have a compac 5346 presario powered by a 400 celeron.it is only running at 66 mhz fsb can i take it up to 100 fsb.can this be done through the bios or can i jump it on the board. it is an intel board.
7 replies
by donmars
I refer you to this page where you will find jumper settings for what you need. Copy and paste this address in the brower address box, then go.
http://www.compaq.com/athome/support/msgs/5300/ty10jmpr.html
I hope you can understand tech information.
The question was auto-closed by TechRepublic
by jwilczyn
No, you can?t do it. Celeron can work with bus speed 66MHz only. You can try to over clock it by changing bus speed only ? e.g. up to 75MHz ? 75 X 6= 450 it may work ? if m/b will accept it (this m/b may support only 66MHz bus speed ? LX m/bs don?t support 100MHz). Celoron has inbuilt an internal multiplayer (66.6 X 6 = 400) ? I tried to over clock it to 100MHz bus speed on BX m/b ? it doesn?t work- why? - 100 X 6 =600, it even didn?t won?t to work properly with 75MHz bus speed. You need BX m/bto try over clock it.
The question was auto-closed by TechRepublic
by butzmann
I'm 98 percent sure you can't. First of all very few Celerons would agree to @clock THAT high. Second -- Intel does not implement overclocking on their boards, it's their policy... Seems quite logical.
The question was auto-closed by TechRepublic
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies