Discussion Locked

Mouse Pointer Not Working

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Win98,196Memory,40gigHD. I have a mouse MouseWorks) that will work with or without USB. When the PC comes on the hourglass is there but after that "NO pointer is there". Checking system under my control panel shows its working and right driver. I have removed the mouse and loaded again more than once. Same thing it shows mouse working but it is not. I have tried with/without USB. Everything in the bios looks fine. Can't understand why it was working one moment and not the next. Can someone suggest some options to try. Thanks

5 replies

by jedeahl

I do have the latest driver. And no this is not a laptop. Any other suggestions.

by jedeahl

Can you tell me Why should I want to reinstall Windows when the rest of the system is working fine? I know how to reinstall I just wondering your thought behind that. What are you expecting that to do.

by paul d. masley

It appears that you may have an IRQ conflict or a defective mouse. You did not say if the mouse was a PS/2, therefore I will assume that it will work both ways. If you are using an adapter to convert it to USB, the problem may be also be there.First, borrow someone else's mouse and plug it into the ps/2 port. Start your computer and see if it works. If not, open your device manager, remove the mouse and then refresh the screen. This will clear up an IRQ conflict. Windows should detectthe mouse, open its database and install a generic ps/2 mouse. Do not use the Mouseworks driver at this time. The mouse should now work. If not, open the the mouse properties in control panel and select microsoft default. No fancy pointers. This should get the ps/2 port operating.

Now, shut down and plug your new mouse in. If it does not work under the generic driver, the mouse is defective. Also, check the device manager at this time and make sure that there is no conflicts.

USBis a strange character. Make sure that you are using an updated version of 98. The first version had limited support for USB. The USB drivers for SE were completely different, but they will work in the first version.

Hope this solves your problem.

Paul.

This discussion is closed to new replies.