4 replies
by thechas
If I read you correctly, you formatted this new hard drive and installed Windows on it.
Correct?
If so, you likely need to update a few device drivers.
Start with the drivers for the chip-set on the motherboard.
Next, with 32MB of RAM, you may have too much software running.
You need to reduce the number of programs that run at startup to the bare minimum necessary.
I heartily recommend that you add at least 64MB of system RAM. This alone may clear up your problem.
If you still have questions, please reject this answer and post a comment with as many system details as possible.
Chas
by mc_jp1
by otl
You are running Windows 98 and mouse is acting stupid. Is the RAM good ? It may be he reason your HD left the system (HD may be good but RAM is bad) ! Try cleaning the contacts on the RAM and its seat, use bond paper just hard enough to feel it rubbing the contact for the RAM, on both the PCB and seat. I performace improves see below !
If ram is EDO or this is a Compaq'd system I would suspect ram; A = not enough or B = bad/not the system required access speed.
FYI - Upgraded my PC to 60ns RAM, PC would not run consistantly, downgraded to 70ns RAM and system was happy, RAM ouput speed to the PC matched, 60ns baffled it/OS on what to do with the data.
by wlbowers
Lots of good stuff to think about. Here is some more.
It could be a virus. They can take up cpu time and everything runs slow.
Lee
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending