Discussion Locked

My CD ROM drive is working too slow

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My system is PIII 450, 192Megs, 10GB HDD, and
the CDROM drive's speed is 48X. I've found
recently the it is working too slow, and it gave me error messages when I play some of the disks I used to play well. I wonder if the sensor is old or dirtyor something.

Please help me out.

5 replies

by csmith

Yes, you are probably correct.
CD-ROM drives can be cleaned using any of several available cleaning kits.
The main problem is usually dirt on the optics.
If this problem is occurring, you should also open your PC and see how clogged up with dust is the CPU fan and heatsink.
Regards, Chris

by zeus who frags

I see two solutions.
1) Your lens is dirty : get some clean kit.
2) Your drive is down. In this way, you could hear the motor of the drive starting, then stoping, then starting again, etc... without no apparent reason.
In the case your lens was dirty, the drive would try to read the same data several times : you could hear it making repeatedly the same sound, as if it tried and failed several times.
How to see the difference between these two problems? -> in the 2nd case, the motor semms toSTOP and then come again after a lap. In the 1st case, it seems to insist a little more quickly.
A know it seems mess but CD-ROM drives a very weak devices!

Hope it helped.
Zeus

This discussion is closed to new replies.