Question Locked

My computers powers but does not boot

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My computer worked fine until a couple of days ago. It started restarting every 5 minutes. I presumed the videocard was erroring out so i changed the powercord to the card, right now it does not boot up anymore at all.

When turning on the computers (scratches) but thats all that happens, no image gets shown on the lcd screen, and it seems that the cpu fan is spinning slower (normally it spins at full speed at start up and slows down afterwards).

I tried removing the ram, both removed means many beebs as usual, 1 or 2 placed back just returns the original problem.

Do you guys maybe know what could be wrong, I presume the video card but dont wanna bring it to the shop for nothing, it might be the powersupply but it worked all fine.

Also weird is that it first started and when switching the gpu powercord made it worse and switching it back kept it bad :(

Hope to get some help from you guys

Giliam

12 replies

by g.oostema

checked my motherbopard, seem to have no problem, is also weird to happen as the computer is brand new (of course that does not really say anything).

And the weird thing is that changing the power cord and back again changed the whole situation.

You really think it is the power supply? don't wanna go buy a new one for nothing.

thanks for helping

by ic-it

Remove the Video card completely (With the power disconnected and off of course).
Attach its power and then fully re-seat it.

You may have wiggled it a bit too much changing the power leads.

by g.oostema

one of the caps on the motherboard is not totally straight. there is no bulging or leakage though. could this be the problem?

by oh smeg

Then pressing and holding the On Button for 20 - 30 seconds to discharge the capacitors inside the case.

After that plug the Mains Lead back in and see if it starts now. If ti does but will not restart you need to replace the Power Supply as it's going faulty.

All of the symptoms that you have described here are possible due to a failing Power Supply.

Col

by g.oostema

tnx for the tip will try that, what do you mean by main leads?

by dldorrance

Just unplug the power cord from the wall socket and hold down the power button as described.

by g.oostema

tnx for the tip.
i tried it but did not do much better.

by g.oostema

Will try it out as soon as i am hom.
tnx for the tip.

Is it bad when one of the caps is a little loose and is not totally straight no dirty gooh or expanded top though.

by g.oostema

tried and but not much change.
will bring the whole case to the shop where i bought the parts today, let them check it out. luckely i just bought it a couple of months ago so still within warranty

by oh smeg

It may have been soldered in place like that but it may also be a failing capacitor which is letting go around it's base where the leads come out of it and are soldered to the M'Board.

If unplugging the mains Lead didn't make any difference your only option here if you want to test this yourself it to try another power supply.

If that works the Power Supply in the case may have taken a Severe Spike and fried it.

Col

This discussion is closed to new replies.