Question Locked

My external hard disk not detected by system

0 helpful
26 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have a Compaq Presario CQ45 106 AU, with AMD Turion -X2 processorwith 2 GB RAM, i picked up a 1 TB external hard disk and moved all my music, family photos and my files to the external hard disk. My laptop was very slow when connected to the external hard disk. I am trying to connect to the hard disk after two days, I can see the hard disk drive (H:, G: and I:) when I open 'my computer window' but the drives do not open and it says that the file or the directory has been corrupted so it cannot be opened.. I do not have back up of my pics, and files, how can i restore it.. I have Windows Vista Home basic.. Please please please HELP!!!!!!!!!!!!!!!!!!!!!!!

26 replies

by older mycroft

Did you employ the use of the 'Safely Remove Hardware' method each time you disconnected it?

External USB HDDs should be shut down and disconnected, before shutting down the host PC.

It is inadvisable to have an external USB HDD connected before you have powered-up the system.

External HDDs should be used for archiving and for system backups ONLY - they are NOT SUITED for permanent connection and constant use, because the cases are flimsy and do not protect the HDD from bumps/vibrations, they also usually do not have any fans for cooling the HDD so the drive/controller can be liable to overheating.

For one or more of the above criteria, ALL external USB HDDs are viewed by the computer as nothing more than a big thumb drive.

[i]It is likely the reason your laptop ran slow was because, due to the nature of all the files you transferred, this external HDD was constantly indexed by your operating system.[/i]

[b]If you have not safely removed it or if you left it connected during shut-down/start-up, I fear that the chances are the partitions have become corrupted and all the data is lost.[/b] :(

You could send the drive away for forensic rescue but it will be VERY expensive.

by luxmee

Lesson learnt.. is there any other way to retrieve the data? cause I have photos of my father who passed away last yr.. don't have copies...

by rob miners

is slowing down when this drive is connected try using a USB Powerd Hub.

Connect the USB drive.

Click Start, Run and type in cmd and press Enter.

At the command prompt, type chkdsk G:/r and then press ENTER.

Follow the prompts if it wants to unmount the volume and let it run through the five stages. If it gets through OK move on to the next drive.

At the command prompt, type chkdsk H:/r and then press ENTER. Do the same for the last drive as well. Let us know what happens.

by luxmee

Thanks for your reply, how long is this supposed to take to get thru one drive? Cause mine is stuck at 4th for a while.. it says 'chkdsk is verifying file data'..

by luxmee

Its still at the 4th of 5 stages.. what do i do? how do i know when its over.. please let me know..

by thumbsup2

Laptops don't provide enough power to spin external drives. They should be connected through a powered hub.

If, while it was connected to the laptop, it was in the process of reading/writing when the power proved to it through the USB connection dropped, the data may well be lost.

Try what Jacky said and let it run until it's complete... may take all day, but let it run. That's the only inexpensive way you have to try to recover the data on the drives.

by luxmee

My external hard disk has separate power input, its does not consume power from my laptop.. Does that help? Thanks for the advise though.. will let you guys know what happens.. pray for me.. am keeping my fingers crossed.. :)

by only_moin1

Thank you, thank you ,thank you! your advice really saved me ....er saved my HDD that is. i cant thank you enough. i was having the same problem with With my external hard disk. And I was at my wit's end. It is our 300 GB hard disk filled almost to the brim . I was almost tearing my hair out with fustration when my wife chanced on your advice. I followed it and lo behold there was all my data. I thank you you again from the bottom of my heart.

by nimisha_singh

you are a life savior....!!! I followed your advise actually forwarded your advise to my husband who lives in a different city due to his work and we managed to recover our all the 300 gb data!!!! What to say!! We could have lost every sweet memory, our wedding photographs and much more!! Jacky God bless you and your love...Thank you thank you thankk you a million times...........

by luxmee

When I check HP system information, it recognizes only my internal hard disk, but in configuration details it shows my external hard disks (G:,H:,I:) but with wrong size and freespace of each partition?

by luxmee

Does it mean I can't recover my data? its still on 4th of 5 stages..

by luxmee

Just started the scan with 'partition find and mount'.. the software detected the hard disk and not separate partitions.. I hope that's alright?

by rob miners

I know that it may seem like forever but it will pan out eventually. You have to have a bit of patience when trying to solve these problems. We don't want to do anymore damage to the drive and we arn't using the proper method with what we have available so we are working around it. Ideally I would normally remove the drive and fit it to another System internally to work on it.

by luxmee

Chkdsk just gave a verdict.. 'The disk does not have enough space to replace bad clusters detected in file 35 of name .

An unspecified error occurred. 84 files processed.' (i have 1TB space on da disk and 341 GB on dat partition)

This is for drive G: on my external hard disk.. should I chkdsk for the other two drives and then try 'PFM' software to sort it or should I directly try with "PFM', please adivse..
What do I do now?

by rob miners

This device is not configured correctly. (Code 1)

To update the drivers for this device, click Update Driver. If that doesn't work, see your hardware documentation for more information.

It's time to let the experts look at the drive. Or try it in a more powerful System.

by rob miners

if it's still running how are you doing the other test. Just let it run through until it finishes. CHKDSK can take anywhere from a few seconds to several days to complete.

by luxmee

The thing is chkdsk is still running, its on 4th of 5 stages.. however I downloaded and am scanning my external hard disk with 'partition find and mount' software.. Hope I am doing it right? please advise..

by luxmee

The command prompt window is still open and running... The PFM software had finished scanning 32% of the hard disk, and I stopped the scan in between.. I hope its OK?

by older mycroft

When you say "[i]..i have 1TB space on da disk and 341 GB on dat partition.[/i]" - [b]you DON'T.[/b]

Throughout this entire thread, so far you have never actually stated HOW MUCH data you transferred to this 1TB HDD, other than saying you "transferred data".

1TB is the unformatted size of an empty HDD.

So how much data did you actually transfer? How much of this data was transferred to the G:\ partition? [i]I only ask because you may very well have filled it too much to have enough FREE SPACE left to recover from.[/i]

by luxmee

Well, the external hard disk is 1TB, G and H drives are of 341 GB partition each and I: is of two hundred and forty something GB partition..

I have put in about 14 GB of music on G drive, about 141 GB of movies on H drive and about 5.5 to 6 GB of photos, documents, excel and stuff on I drive..

by rob miners

is in bad shape. If you really need this information stop using the drive and contact OnTrack. It will be expensive though.

If you want to take the risk you can use this to try and Recover your Data you have to remember that it may be damaged.

Recuva - File Recovery

http://www.recuva.com/

by luxmee

I tried the PFM software, it recognized only G drive and partition size as 367 GB, my laptop has 250 GB internal hard disk and when I tried mounting it onto the internal hard disk it said not enough space..

I put all this data last week to the external drive to reformat my laptop.. The data was a total of about 165 to 170 GB onto external drive.. How is it possible that the data in G drive alone can be large enough not to fit into my internal drive.. the data in G drive is about 15 GB..

Also which is better PFM or recuva.. Should I chkdsk G and H drives also?

When I plugged in the external drive now, it could not find the driver software. In the devise manager i found my external drive under 'other' when i checked the properties it said that the driver software is not working properly.. Code 1 error.. what does it mean?

This discussion is closed to new replies.