17 replies
by limatik
You haven't specified much details about your hardware, I would assume only two possible problems:
1. Your hardware does not support high capacity HDD
2. Your bios is not updated
If your problem is no. 2, you have to get an updated driver from your h/w manufacturer's site; for no. 1, I guess you'll have to upgrade your h/w.
Hope this helps. good luck.
by kliente59
by an_it_guy
Agree with previous answer. Further, also check in your BIOS settings. If your BIOS supports auto-detect, try auto-detecting it, or else, try specifying all the details of your HDD manually like number of cylinders etc. This info is always found on the top of your HardDisk.
Cheers.
by kliente59
by opatzg9
Next option if your motherboard does not support the larger drive then try a pci ide card they're around $30 and will run your drive fine. Next if your using windows95 then 2 meg is your partition size limit. Either make 20 drives out of it or upgrade to windows 98 and fat32.
Good Luck. More info would be helpful
by kliente59
by kinetechs
Along with the previous correct answers...it could also be an Operating System limitation or the file system type (i.e. FAT). If your OS supports other file systems, you may want to convert the partition or create additional partitions.
Cheers!~Sean
by kliente59
by edsdave
by kliente59
by zlitocook
by kliente59
by yelhsa3840
by kliente59
by kliente59
by kliente59
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending