Question Locked

MY OPTICAL DRIVE SOME TIMES READ THE DISK AND SOME TIMES DOES NOT

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I HAVE CD/DVD RW OPTICAL DRIVE.IT DOES NOT READ DISKS PROPERLY. SOMETIMES READS AND SOMETIMES DOES NOT.I HAVE CHECKED THE DATA CALBE AND POWER CABLE.

WHAT COULD BE THE REASON?

3 replies

by 93961

STOP SHOUTING at us in this Forum!!!??? Write everything with CAPS LOCK OFF!!!
You seem to have only problems. What type of LAN or System Administration you do or know!!!??? You seem to know nothing!!! How did you become a LAN Administrator!!!???
Either you seem to know nothing or know everything and testing the knowledge of all in this forum by suddenly posting problems or asking everything!!!???

by oh smeg

YOU LEAVE DISC'S INT HE DRIVE ALL OF THE TIME AND THE LASERS ARE BEGINNING TO LOOSE THEIR INTENSITY. LED'S HAVE A LIMITED LIFE AND THE MORE THAT THEY ARE USED THE DULLER THEY GET OVER ENOUGH TIME. SO AS THEY LED'S LOOSE INTENSITY THEY ARE NOT AS BRIGHT AND HAVE GREATER DIFFICULTY IN READING THE REFLECTED LIGHT FROM THE DISC'S.

OPTICAL DRIVES USE TWO DIFFERENT WAVELENGTH/COLOR LED'S ONE FOR CD'S AND ONE FOR DVDS SO THE MORE THAT ONE TYPE OF DISC IS LEFT INT HE DRIVE THE LOWER THE INTENSITY OF THAT LED.

IF YOU NEED A DISC IN THE DRIVE A LOT OF THE TIME IT IS BETTER TO USE A SOFTWARE PACKAGE AND RUN A VIRTUAL DRIVE. ;)

COL

This discussion is closed to new replies.