Discussion Locked

NEC CD ROM Drive: 462 1.13

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just bought a used Mac., and it has a (NEC CD ROM Drive: 462 1.13) in it, but I can't figure out how to unlock it so I can use the drive to install..

Can you help me, or know where I might can find this information?

Thank You,
Sandra Marquez
outlawles.mail@verizon.net

5 replies

by timtoombs

normally, there is a small hole in the front where a straightened paper clip will fit in. with the power off, insert the wire straight in until resistance is felt, then push approx. 1/4 in. more and door should release from latch. it could be thata cd is in there but not seated, causung it to lock up the door.

by estebandelatorre

IS THE DRIVE POWERED?
When booting the machine, you should see some light activity in the cd unit.
If yes, then proceed as described in answer1
if not, remove cpu cover and unplug and plug again the power connector and the ide connector.

This discussion is closed to new replies.