Discussion Locked

Nedd Help: Data Recovery Gone Wrong

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

It happneded this morning. I have two HD, the master drive is for OS (dual boot)...and is still running fine.

The second HD is for my files (music, videos, pics....multimedia etc).

So I used GetDataBack to try salvage some files that I lost.......was able to retrieve it...& everything seems to be running just fine.

Then I rebooted my PC........Then the HD letter for the second drive is missing!!!

My second HD cannot be found anywhere.

I tried some troubleshooting:

-Device Manager can detect it (IDE Controller).

-Partition Magic can still see the drive (No letter).

-Partition Magic still recognizes all the original partitions on the drive.

-But, Partition Magic sees it as an unallocated drive (meaning wiped out & now emptied?)
-----------------------------------

So now I'm stuck, I'm sure the connections is fine, the bios is fine, everything was just fine until I rebooted the PC.

Should I remove the drive and re-connect the IDE again?

or buy one of those USB to IDE cable and see if my pc will detect it and give a drive letter? (hoping the files are still on the drive)

thanks in advance!

16 replies

by amberhaze

In Computer Management, (Under Administrative Tools), ==> Storage ==> Disk Management

If you can see the drive there, try re-assigning the drive letter to it... In most cases, this will work unless the format has been overwritten.

Good Luck

by amberhaze

ugh, it is not looking good. Provided you don't format it, the creating the logical drive won't "erase" the data, however if the parameters are wrong, you could accidentally over-write data and at the same time mess up any future attempt to repair.

You might try Norton Disk Doctor, I am not sure but it might be able to deal with the destroyed partition data (which is exactly what I think is wrong, I think your partition damaged)

Good Luck

by pdx student

thanks for the reply amberhaze, but before I proceed. This is what Disk Managment showsHERE

I'm scared now, because it shows my disk as Free Space!

So I have 2 options:

- Convert Drive to Dynamic Disk (irrelavent)
- New Logical Drive (wouldn't this create a whole new partition?)

by ideaddict

I suggest you to unplugged that hard disk & plug into another pc to check it functionality. If same thing happen then you should format it with Fat32 or NTFS system & then try again to recover your data.

Wish you good luck

by pdx student

RissVann,

If I have to format the drive....wouldn't that completely erase the data?

So I guess I have a damaged partition or master boot record...I will try the swap & plug though.

by aschol

If you have access to a recovery program such as r-studio (may be similar to GetDataBack, I have never used that) you MAY be able to do a quick format of the drive and then scan for any file entires. I have been able to do this successfully a few times, no guarantees though.

by hal 9000

The first thing with any DATA RECOVERY Program is that you should [b]NEVER EVER[/b] Save the saved Data to the original Locations but move it to a different drive where you do not run the change of overwriting the original Data.

I'm not overly sure how Get MY DATA BACK works as it is relatively new to the market and I have not as yet had a play with it but it's quite possible that it creates a Partition that fails to be seen on the Reboot so as you have already got Get My Data Back try running it again and see what happens, if you get the drive back copy] top something that is stable all of your data [b]IMMEDIATELY[/b] and then reboot, if the second HDD is again invisible you can just perform a Format on it and then return your Data to it once you have it running properly again.

It would also be a very good idea to use the drive makers testing utility on the drive ion question just to make sure that there is nothing wrong with it.

Col

by pdx student

Hal 9000,

that's what I did!

Initially the recovered files was on the desktop, and then I moved it to the second drive where it was originally.....then I rebooted my pc and it all got wiped!

thanks

I'll it see if I can still retrieve those files.

by electricdragon

Before you buy or reformat anything you may want to make sure its not your mbr.
Boot into win98 and click start/run, type in:
fdisk e: /mbr
This will move the copy of your master boot record to the front of the drive, and it will do no harm if this is not the problem.
Exit fdisk and see if the drive shows up after the reboot.
HTH
ED

by pdx student

electricdragon,

Hmmm...interesting. I didn't think MBR would even matter since the drive is slave. I'll give it a shot.

My master drive is the only drive that's funtional...thank god.

by hal 9000

There are MBR's on every HDD as they are effectively a MAP of the drive and tell it where any Data is stored so if the MBR repair doesn't work you can reformat the drive to the way that it was and then try one of these programs to Recover your Data or recover the Data depending on the program used.

http://www.x-ways.net/davory/index-m.html

http://www.iolo.com/sr/3/

http://www.ontrack.com/Homepage.aspx?id=3&pagename=Software

http://www.pcinspector.de/file_recovery/UK/welcome.htm

http://www.stellarinfo.com/

http://www.bitmart.net/r2k.shtml

http://www.winternals.com/

Before you do anything I would chose the product that you wish and then follow the directions.

My first option would be On Tracks Pro but it doesn't come cheap, on the other hand however it should be capable of rebuilding the DRIVE very quickly and is the fastest option.

However I again stress that it is virtually important to never write data to its original position and even the Desktop will only be a shortcut as it [b]Can Not[/b] hold the data just Shortcuts to it. I would tend to remove this drive from the computer fit it to a USB Caddy and then try to work on it. You may be required to fit another HDD to your computer to hold the data that you recover. And this is very important Run the Drive Makers Testing Utility over the drive before you attempt to write to it again.

If you need any help just ask.

Col

by wlbowers

If partition magic can still recognize the partition. Get yourself a new drive and copy the partition to the new drive.

Now run the data recovery on the move partition.

It sounds like the drive is dying faster than you caan recover it.

DO NOT put it on a usb case. If there is any corrupted blocks in the MBR it will never get assigned.

Lee

This discussion is closed to new replies.