Discussion Locked

Need hardware specs on OS-locked laptop

0 helpful
22 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I've inherited a surplus Compaq Armada M300 laptop that has been agressively upgraded by my employer's IT staff--meaning it no longer conforms to factory specs, and I don't know the first thing about working with a laptop that has no accessible operating system. Officially, the M300 is still running XP Pro, but our tech has disavowed the license and can't provide a password, so I can't so much as log on. I need some way to boot around the OS and determine the exact hardware specs so I can begin preparing a Linux install to pave over Win XP.

22 replies

by jamesrl

BIOS Password or Win XP password.

If you can acecss the BIOS, you can find out the basic HW configuration. I would be very suprised if they used a unique BIOS password, generally they would use the same BIOS password for all their PCs. If all else fails there are techniques for getting access to BIOS information - on old desktops we used to take the CMOS battery out but on laptops, there are recovery passwords that the manufacturer can help you with.

You also need access to the BIOS to reset the boot sequence to allow you to boot from CD.

If this was an XP Pro machine on a domain, a domain admin should be able to log on and add an ID for you.

James

by Jay Garmon

I don't think I can get to the BIOS, at least not as the system is currently configured (or rather, I can't figure out how). In any case, I don't have the budget to be buying a password cracker program, at least not this early in the project. Thanks for the advice, though.

by Jay Garmon

As to Login Recovery, I'm not sure I want to outsource my password cracking to someone I don't know, especially when it involves sending them a file. The Thomas Mathiesen cracker only works for WinNT/2K, not XP (according to teh site, anyway). Alas, I also don't have an XP CD. I'm simply to ill-equipped (or cowardly) to try any of these techniques. Thanks, though.

by thechas

Jay,

I suggest that you download and burn a copy of the Ultimate Boot CD:

http://www.ultimatebootcd.com/

Then, boot from the CD and run some of the diagnostic programs to discover your hardware.

As a bonus, the primary UBCD has a number of tools on it to help set up a system for Linux. Including tools to wipe and partition the hard drive.

There is a link to a Windows version on the site too.

Chas

by wannab

There are also password recovery tools you can find here http://www.openwall.com/passwords/nt.shtml some are free some are not, also some may cause registy errors but if you are reinstalling any way it wont matter. Also once you can get into the OS you can install belarc and it can tell you just about all you will need to know about the machine, and as was mentioned above you can get info from the bios as well, so you may not need to do all of this. Also you can create a live liux cd that runs a version of linux, knoppix or any other variant from cd, you can check the distro's out here http://distrowatch.com/ and choose which one you like, I believe most if not all are free, and usually have some tool to do a HDD install.

by Jay Garmon

None of the free utilities seemed to match my needs, and I'm not quite ready to spend on a password cracker. Also, I'm not ready to commit to a distro just yet. Thanks, though.

by jmgarvin

My gut instinct is to hell with the hardware and just diving in. Linux is good about supporting older hardware (even if someone went a little upgrade nuts). There is only so much you can upgrade on a laptop.

Just dive in an install....

by hal 9000

Jay,

The above are all good answers if you still need help drop me a line and I'll see what I can come up with.

Cheers

Col

by smoking gnu

http://home.eunet.no/~pnordahl/ntpasswd/bootdisk.html
download the boot disk from here, write to a floppy or cdrom (depending which image you download) boot up with it and follow the instructions, it will wipe the xp password and allow you access. However most new linux distros will automatically detect hardware and load modules for it, if something does not work straight off but you can boot into linux then type the command: dmesg :into the command prompt and all detectable hardware will be listed in the output

by Jay Garmon

The utility can't seem to get XP to accept the new password. Too bad, I had high hopes. I'm also not ready to blindly pave in Linux without knowing my hardware specs. Not yet, anyway.

JMGARVIN - I meant to leave the same comment for you, but I must have pooched the submission somehow. Sorry.

by smoking gnu

http://home.eunet.no/~pnordahl/ntpasswd/bootdisk.html
download the boot disk from here, write to a floppy or cdrom (depending which image you download) boot up with it and follow the instructions, it will wipe the xp password and allow you access. However most new linux distros will automatically detect hardware and load modules for it, if something does not work straight off but you can boot into linux then type the command: dmesg :into the command prompt and all detectable hardware will be listed in the output

by Jay Garmon

I feel like I've heard this somewhere before...oh yeah, the previous response. No fair trying to get double points!

by jamesrl

I'm not going for points. I just wanna help.

You haven't been clear - is this password the Power on password or the Windowns password?

The Power On password would look more crude graphically and would appear before any windows splash screens. Its basically set up in the BIOS - so if there is a BIOS password as well you would need it to change/remove the power on password(unless you get one of the utilities).

To try and access the BIOS, just hit F10 and hold it as you power on the PC. If you can access the BIOS you can run through the screens and see the vital information such as the process type and speed, the amount of RAM, the size of the HD (not the free space, just the total size) and other goodies you will need to know. Don't worry about messing things up - in every modern BIOS that I have come across there is an option to exit and not save the changes. In most good BIOSs there are help screens as well to explain the meanings of the settings.

Hopes this helps. If you were closer, I'd pop in to take a look myself.

James

by Jay Garmon

Wow, sorry I was unclear (I'm a n00b). The f10 trick was very helpful, at least in specing out what I'm dealing with. This was exactly what I'm looking for and, based on what I've been told, I can now choose a bootable Linux distro and begin paving over this thing called XP.

This discussion is closed to new replies.