4 replies
by dturskey Accepted solution
by oh smeg Accepted solution
They should be compatible with your computer but as it is a AMD CPU this all depends on the Chip Set that the M'Board uses and just how old your computer actually is. Some of the Chip Sets used to make AMD M'Boards are finicky and do not like to be used with certain other chip sets in other devices.
As for Compatibility between RAID Controllers and HDD provided that you have the right type of Drive for the Controller card that you buy there are no Compatibility Issues. Though you do need to buy SATA Drives if you get a SATA Raid Controller or IDE Drives if you buy a IDE RAID Controller. This all depends on the Controller Card.
You may also have to change the PCI Slot on your M'Board that it is plugged into to get it to work as well.
As for installing Windows onto a RAID Array all that is required there is to press the [b]F6 Key[/b] when the first blue screen appears and then wait till you are prompted and insert a Floppy with the RAID Drivers copied to its Root then press Enter. The system will then load the RAID Drivers and walk you through the RAID Array Setup.
If you do not have a Floppy Drive you can use a product like nLite to make a Slipstreamed Install Disc and include the RAID Drivers on it along with any Service Packs and or Hot Fixes released after your XP Install Disc was made.
http://www.nliteos.com/download.html
Just be sure to read the Directions for use on the nLite Web Site here
http://www.nliteos.com/guides.html
But instead of setting up a RAID Array it would be considerably better to [b]BACKUP[/b] all your Data regularly so that when you next suffer a Hardware Failure you are not relying on your existing Hardware to recover your data. This can be tricky from a failed RAID Array.
Instead I would suggest buying a External HDD Case like the MX1 from Antec
http://www.antec.com/Believe_it/product.php?id=NDc=
Then buy a SATA HDD and fit it to this case. These MX1 Cases are actively cooled so the HDD will last longer than in one of the cheap no name enclosures that allow the HDD in them to overheat. But no matter what is suggested by either the sales person on the destructions with the Enclosure it is not recommended to leave them running for long periods and it is most defiantly recommended to use the Safely Remove Option under Windows to prevent HDD Partition Table Corruption by simply removing the power when the HDD is performing a Read/Write Operation.
Col
by the 'g-man.' Accepted solution
and hook it up to your PC.
Simpler, pre-built and ready to go. Google QNAP to see what I mean.
by balge Accepted solution
hi
if you want more reliability mirrored RAID 1 is not a great improvement you still have non-redundant fail of the controller. Duplexed RAID 1 would be better but you need two controllers as well plus a spare controller and a spare drive to actually have
any redundancy
Would be better getting decent backup/restore
solution and backing up regularly
WD would not be my first choice for reliability either
my 2p worth..
cheers!
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending