NetMos I/O Controller Card (PCI)
Both onboard serial ports on my PC are useless. I purchased a NetMos Nm9835CV Duel I/O Controller Card (PCI), COM1 and COM2 are both showing under Device Manager but nothing seems to work.
Please help
Hardware
Both onboard serial ports on my PC are useless. I purchased a NetMos Nm9835CV Duel I/O Controller Card (PCI), COM1 and COM2 are both showing under Device Manager but nothing seems to work.
Please help
by rawright
Not much information here, but I'll try:
I assume that by "useless" you mean that both ports are damaged and non-functional. They still should be detected, though, and your PCI dual serial card should have installed above them on COM3 and 4, or higher.
When you boot, enter the BIOS Setup and disable the onboard serial ports there. Re-install the PCI card and let Windows detect it. If it doesn't, use the Add/Remove hardware applet to manually create new serial ports and install the drivers.
On a different tack, try putting a jumper between pins 2 and 3 on any of your ports, then create a connection to that port in Hyperterminal. If you can see what you're typing with the jumper in place, the port is working correctly, and your problem is probably in the handshaking.
This discussion is closed to new replies.
Sort by Trending