Discussion Locked

Network Local Printer?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a small computer network, two computers networked together, I have one printer directly connected to one computer via parallel port, Is there any way in network neighborhood to share the printer, or do I need a print server to do that?

7 replies

by ann777

You didn't mention your OS... but yes you can share the printer without any addtional hardware.

Basically you need to setup "File and Printer sharing" in Control Panel --> Networks --> and set up the option on the computer with the printer attached. Then go to your printers folder and right-click on the printer and shar it (give it a share name). Save and you should be good to go.

On the other computer, go to control panel --> printers --> Add printer and choose network printer. Browse on over to the first computer and then you should be able to test print and print normally to it. The first computer will always control acces to the printer -- ie. it will need to remain powered on in order for the second computer to be able to print to it.

by sharon

You can also buy a printer switch. They are pretty cheap. I think the last one we bought was around $15. Sharing the printer through network neighborhood is easy, but as Ana said, you'll have to make sure that the computer that the printer is connected to is on for the other pc to print. If you get a printer switch, it doesnt matter. The printer is connected locally to each machine.

by stan

Go to Network Neighborhood right click and choose properties, enable file and print sharing. Go to your printer properties and choose to share the printer. On the other PC go Network Neighborhood and locate the printer on the PC it is attached to. Right click on it and choose install, follow the instuction to install the printer.

This discussion is closed to new replies.