Question Locked

New Hard Disk for Pentium II PC

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just purchased an 80GB Seagate ATA 100 drive for an old Pentium II PC. However, when I connect the hard disk to the computer and boot it up, the BIOS tries to recognise it but nothing happens. I have set the CMOS option for Primary Master disk to AUTO with LBA mode enabled. The jumpers are also set to Master on the hard disk.

It currently has 2 x 8GB hard disk and a CD ROM drive.

Do I need to upgrade the BIOS?
or Do I need to buy a PCI IDE Card to connect my new Hard disk? If I need a new PCI card, do I need one which is PCI 2.1 compliant or are they backward compatible as well?

Any help would be much appreciated.
Thanks

3 replies

by brendan_ker

i was working on a compaq pii the other day and found out that it wouldnt accept any memory greater than 256k and no hdd greater than 40gb hope this helps

by jesus_c

You will probably have to upgrade the bios but do not set the detection to auto as this generally causes non registration of the hdd.Get your bios to detect the hdd but i would upgrade the bios first

This discussion is closed to new replies.