Discussion Locked

New Hardware

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I put a new display card in my computer and it is working good. when I start my computer I get found new hardware and it is for my old card.It is a built in card and I can't just shut it off manually and I can't figure out how to shut it off in my system. Would some one help me and tell me what command I need to use.

3 replies

by dmiles

By built in ,you mean that it is intergrated on the motherboard

To disable,boot computer,when the Start Up screen appears,press selected key to enter Setup,in Bios configuration panel,locate the graphics display on the Advance tab,locate display in list,if you right click on the graphics chip,you should get a menu to disable,select
Now exit and save changes.

by handrick

I can't use my mouse only thing I can do is use arrows and change the type PCI, VRA or something like that

by thechas

For display to load first in BIOS settings, select the type of slot that your video card plugs into.

Look in the Integrated Peripherals section to see if the on-board video is listed there, and disable it if it is.

Also, look in the manual forthe motherboard / system and see if there are jumpers that need to be set to disable the on-board video.

Tips to disable the on-board video are a common item in the FAQ list for most motherboards and systems that have on-board video. So, it wouldbe worth it to check the manufactures web site for details.

Chas

This discussion is closed to new replies.