Discussion Locked

New HDD

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just got a 120 GB WD HDD, and I'm trying to install it on my Dell Dim 4300S. but with no luck. I've tried everything I know how to do following several different steps of instructions... I can't get my BIOS to recognize either drive. Help!?

6 replies

by thechas

First off, triple check the jumpers on both hard drives.
One must be set as master, the other as slave.

Or, if you have a cable select style IDE cable, both drives need to be set for cable select.

What brand is the other drive?
I have seen many a situations where 2 different manufactures drives will NOT function together on the same IDE cable.

Chas

by tryals15

My old drive is a 20GB Maxtor HDD. I've checked and rechecked the jumpers and connects. Also, when I have both conneceted as Master/Slave, my BIOS won't recognize either drive

by statykserver

If you have already tried to autodetect the drive from within the bios then it might be that the current bios doesn't support the new larger drive. I know sometimes Dell has downloads for the bios but if not you will have to determine the bios manufacturer and see if you can find an update to your current revision.

You should be able to go back to your original config with your 20 GB with no problems. If your system is having problems reading your original one as well then power down the system, remove power cable and wait about thirty seconds before trying it again.

by glyall

did you use the CD that came with the hard drive?
I just got a WD 120Gb HD. I run the install CD that came with the drive. Then I was able to install Win XP.

Do you get the three year warranty.
If not you should.

Good Luck

This discussion is closed to new replies.