10 replies
by gateway_tech
by firestop
by tbradley
I would agree with caller 1 in theory, yet I take a slightly different approach, and have done several hundred upgrades of this type without having to re-install the operating software.
First - copy down all your important settings, ie ISP numbers, and backup any data you couldn't live without.
2nd - Setup the new motherboard, with video card only ( in near to original slot )( This helps in resolving PCI conflicts ), and the floppy drive. Boot the machine into BIOS, usually by hitting the DEL key at startup.
Ensure the bios is set to recognize PnP OS, primary video is set to AGP or PCI, depending on your card, and that PCI detection is set to automatic.
Install the rest of your peripherals, the hard drive, and boot up. 99 times out of 100, you will be ok, but have all your device drivers handy, in case you need to load them.
Check the system settings in Control panel, and make sure all devices are recognized with no errors.
Then, as a last resort, you could do a clean install.
by firestop
by shmaltz
I have done this with no backup at all i just shut down the computer changed the motherboard and memory and cpu and restarted the computer and woops after installing all the drivers (whcih I made sure I have before I upgraded) the computer was back to normal, in other words you dont have to do anything before you upgrade as long as the harddrive stays the same, since windows does not load any device drviers for devices it does not detect you dont even have to remove the old devices, thats how Idid it more then once and it worked just fine.
In fact you can even do that without upgrading and still not loosing any data by deleting the enum tree of the registry (I do that when there are conflicts between devices and I want to reinstall all of them).
In other words dont bother with anything just shutdown windows unscrew the box pop in your new hardware and restart windows every thing will just be fine after you install the drives, You dont need any backups or device removels before youupgrade.
by dcosgrove
by firestop
by firestop
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending