Discussion Locked

NEXDISK USB Flash Drives

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
What are the PROs and CONs for this device & are they worth the money? Will they work on a Windows NT Operating System ???

4 replies

by thechas

Don't know about the particular brand, but in general, USB flash drives are a very handy tool to have.

As to cost, I don't think $55 (US) is out of line for 256MB of storage.
http://tinyurl.com/f2n3

Now, NT is a problem.
NT CANNOT access ANYUSB device.

You either need to upgrade to W2K, or XP.
Or, you can try a 3rd party solution.
http://tinyurl.com/6oj2

Chas

by mmerritt

I do not own a Nexdisk device but do have and use a similar Universal Smart Drive (USD) 128Mb USB device which I like. I agree with the first answer but if you need to use the Nexdisk with NT it may be possible. The Nexdisk device is a bootable device if your BIOS supports a USB bootable device/drive option. If the BIOS does support USB as a boot option you could possibly copy the MS-DOS boot files to it and copy files you need between the Nexdisk device and FAT partitions on other drives. You will not be able to read or copy files located on NTFS partitions so it will be necessary to have a FAT partition on one of your fixed drives in order to use the Nexdisk to copy files between the two. It works for me.

by nccorthu

I've strated to use them. They're Great. However will not owrk on NT Need to use Win ME, win2k,Xp. They will setup automatically and I'm using them to replace Zip disks for a lot of stuff.
Big advantage if you go to another machine ( that has the correct OS) you just plug it in and your on.
There are drivers available for Win 98 and even 95.
Haven't tried that but it may be a hassle again.

Gary O

by wlbowers

I am not familiar with that brand.

I have several. MIB, Sony, San Disk, Samsung. The prices have dropped recently.

I use them to transport a lot of my diagnostic programs.

Just remember to use the utility to disconnect the device first or you might corrupt the data on it.

This discussion is closed to new replies.