Discussion Locked

No Display after bios

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an Acer Aspire T130, when i power up i see the bios screen, then it goes blank, i have tested the hard drive in another machine which was fine, i have changed the PSU for as known good one and i have changed the graphics card for a known good one, there are no beeps at all, any suggestions what to look at next.

3 replies

by thmiuatga

Seems that you have a problem withe the BIOS. Have you tried clearing the CMOS chip and then restarting? If you do that and you still have the same problem then you have a bad BIOS and you either have to flash it with an updated program file or replace your motherboard.

Good luck!

This discussion is closed to new replies.