Question Locked

No DVD/CD-ROM drives in Device Manager after SP2 upgrade

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I had a normal working system with LITE-ON DVD.
I had to upgrade Win XP Pro with SP2, and now
I can not access my DVD drive.
When I look in Devices Manager, It does not show
the DVD/CD-ROM drives line.

I reinstalled my MB (ABIT KV8 Pro) drivers for
the PATA and SATA.
My SATA drives work OK.
I have a Maxtor TR133 PATA card also installed,
and the hard drives on this card work OK.

Does any one have any ideas?

6 replies

by langlier

1. Upgrade from what OS?
2. Have you checked the BIOS to be sure you see the optical drive there?
3. Did you format and upgrade or did you attempt to transfer everything?
4. Is there anything else on the IDE cable for the drive? Are the jumpers configured correctly for both?

thatll work for a start

by tomdetzel

I upgraded from Win XP pro SP1.
I did an upgrade install of Win XP w/SP2.
I was mistaken about the "no CD/DVD entry in Device Manager, there is one. I see only a "MagicISO mount" CD/DVD drive. I removed the driver for MagicISO. Now I see no DVD drives.
Then I started having problems where Win XP would hang with a blank screen.
I then unplugged my extra PATA card for my
extra hard drives, then Win XP would boot correctly off the SATA HD I have.
But now I'm having no USB devices work or connect.
I'm thinking MB device drivers or a bad MD.

by tomdetzel

Yes, the BIOS sees the DVD drive.
It is the only drive on the cable and is master.
I also now have upgraded my ABIT KV8 Pro BIOS
to the newest.

by langlier

It sounds like something got messed up during the upgrade to SP2. Best option - backup, format, and reinstall windows.

You should be able to boot off of the windows xp cd. A Repair install may work but is more likely to be a waste of time in this case as it will likely "lose" the optical drive midway through the setup.

95% sure this is a windows issue and not a hardware issue.

by sgt_shultz

i would look for your symptoms on the website of whomever made your burning software. there was an issue that caused the cd drives to disappear. i think it was ez cd creator, can't remember...
do they happen to show up in safe mode?

This discussion is closed to new replies.