IF you built this system yourself, or this is a new replacement motherboard in an OEM case, take the motherboard out and make sure none of the little standoffs are in the wrong place. That would cause a short somewhere on the bottom of the board.
I've had this happen to me once, and once only. I had a standoff located in a wrong hole underneath the parallel port, and EVERYTHING worked perfectly, except the parallel port. It took me almost a MONTH to figure that out. Luckily, the case I had, had an exposed backplane, and I could actually see the screw base of the standoff sticking thru the hole directly under the parallel port. I noticed it completely by accident one day.
You'll never make the same mistake twice! :) With all that work removing and replacing the board, what a mess!
A