Question Locked

No video on emachine

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
have a d2266 with 512 mb ram has both onboard and external video card and the agp slot is missing form the motherboard. attempted to remove video an use onboard port with no luck. Rearranged ram no luck. sytem appears to be accessing the cd drive and the hard drive at the same time. Can someone please give me advice on how to get my video back.

3 replies

by hal 9000

You can try clearing BIOS and see if that will give you the default On Board Video.

No Guarantee that it will work but when the M'Board breaks down it's about the only alternative available.

Col

by norehca

so you have no display? I would say try clearing the BIOS. To do this you need to mess with some jumpers. Usually closest to the battery will be 3 prongs. With the power cable unplugged switching the cap over to the secnd and third prongs for 10 seconds will clear the CMOS. Then put the cap back on prongs 1 and 2.

If your display works up to WIndows booting then put your old video card back in and before taking it out ths time uninstall and drivers for it and remove it from the device manager. Right click my computer, properties, hardware tab, device manager.

This discussion is closed to new replies.