Discussion Locked

Nokia Valuegraph 447V Monitor

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Some of the adjustment buttons on the front have two different modes. Have forgotten how to change mode. I remember it was something about pressing two buttons at the same time, but cant figure out which one, and how. Have tried all combinations butcant get it to work.

11 replies

by richard_barsby

Hi most of the Nokia 447 monitors have a shift button to access the 2nd function which has to be held while operating these functions. If you want to get into the factory settings then you have to connect two pins of the pcb edge connector together in order to save these settings. if you need more info let me know the main board model No usually SMA something in silk screen on board.

Best of Luck

Rich

by Member 36413430

There is no shift button as on the later models. The buttons can adjust the size and location of the screen. The second mode as I remember it adjust the shape of the screen.

by cajundon

Hi Thor,

Nokia? Display Products was purchased by ViewSonic?.

http://www.viewsonic.com/

You may contact ViewSonic? Customer Support in three ways:

Telephone: (800) 688-6688
e-mail: vstech@viewsonic.com
Fax: (909) 468-1202

Good luck and have a great day.

Don

by Member 36413430

I sent a mail to ViewSonic a couple of weeks ago and have not received an answer yet. (even tried Nokia but they forwarded me to ViewSonic) I was hoping someone had a user manual and could look it up for me. I may have posted this in the wrong group, but will leave it open in case someone has a manual. Thanks for all good suggestions.

by estebandelatorre

Press the navigation bottum at the front of the monitor and roll the whell right to left that is under the screen gabinet. (keep the navigation buttom pressed.

This discussion is closed to new replies.