Discussion Locked

Not enough hardware resources available

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Windows 98 is not able to use XWAVE Sound Blaster Device because there are not enough hardware resources available on your computer (free IRQ resources: None).
How can I take care of this problem? I did not have this problem before, but unfortunately I can not explain HOW this problem appeard.
Thank you for your time.
ElCacique,

1 reply

by cbach1997

Is this something that worked before, or is this a new setup?

Go into your computer's BIOS and make every IRQ and DMA available to the Plug and Play (PnP) controller. If you use an external or internal modem, you may want to leave IRQ 3 and 4 alone. A couple things you can also look for in your BIOS are settings called "assign IRQ to VGA" and "assign IRQ to USB". Disable the USB first, then VGA if necessary.

Every time you play around, look also for a Reset Configuration Data - this resets the resource allocation every time you monkey with it.

This is all based on an Award BIOS, if you have a funny kind of computer or use another type, it will look different but hopefully offer the same options...

You must have a lot of hardware in that box to run out of IRQs. I can relate, though, I get the message sometimes on my WinME box - I have a lot of gunk in it,

Good luck, hope this helps,
cbach1997@hotmail.com (not user deleted)

This discussion is closed to new replies.