11 replies
by al_alonzo
by al_alonzo
by grbeckmeyer
by al_alonzo
by donmars
I first install NT on a 4 gig partition then install service pack 6a and use the 2 boot floppies made from partion magic to create one big 20 gig drive (the size I have, it will do 40 gigs too). You need service pack 4 and up and your bios must be compatible with large drive access. If you do not have Partition Magic you can follow the instructions here.
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q197667
Or here
http://www.windows2000faq.com/Articles/Index.cfm?ArticleID=13922
Partition Magic is a real nice tool to have though!
by donmars
I thought I answered this but where is my answer? So I will do it again. First you cannot get NT to install on anything larger than 4 gigs. So I install NT on a 4 gig partition then upgrade to service pack 6a. NT will do large drives providing your hardware bios is large drive compatible and you have service pack 4 or up. After upgrading to 6a I use the 2 boot floppies made from Partition Magic to create one big partition. If you do not have Partition Magic then try this: Use a 2gig partion andthen format the 2gig partion using ntfs. install nt on this partion. When nt is done installing, install one of the following sp4, sp5, or sp6a and and use disk administrator to see the rest of the drive. I have not tried this method but friend saysthis works.It sure seems easy. Or go here and this may help:
http://www.windows2000faq.com/Articles/Index.cfm?ArticleID=13894
Partition Magic is a real cool tool to have though.
by al_alonzo
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending