Which you didn't include. But generally speaking no you don't need to push the F6 key and install SATA Drivers on NVidia Chip Set M'Boards. Windows should just install without a problem 99 times out of 100.
If you have the 1 in a 100 that you need to install drivers for the SATA you should generally speaking use the SATA RAID option and forget about the rest. What I think you'll find is happening is that when you push the F6 key you are then asked to insert a floppy with the drivers on and when you do this and press enter you are given a list of the drivers available on that floppy not everything that you need to install but what is available on that floppy to install.
A [i]nforce storage controller[/i] is the SATA Controlled made by Nforce to a set standard this will be the SATA Driver that you'll need to install if you are actually asked to install anything when you are attempting to Install Windows.
[i]also ive download 2 different drivers one is sata raid for executing on a floppy and the other is sata raid/ide? which 1 should i use?[/i]
Use the SATA one and not the IDE one as you don't need to install IDE Drivers ever to load Windows unless you are running a Software RAID off the IDE Chanel. What you are most likely finding confusing is the Word [b]RAID[/b] many M'Board makers use this to denote the SATA Controller and not the fact that you are actually installing a RAID Array as with only one SATA Drive it's impossible to setup a RAID Array but it will give you the necessary drivers for the SATA Controller Chip.
Col