Discussion Locked

Old disk in new system.

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Now here's a good one.
How many of you out there have ever wanted to put the Hard drive from your old system into your new system as a second drive?

Now I'm not just talking about using it for extra space... that's easy. What I'm trying to do is leave all the original data intact and accessible to the new system.

I have tried everything I can think of but have been unable to get the new system to assign a drive letter to the old disk.

Disk manager can see the second drive and even the fat16 partition on it, but the "change drive letter and path" option is grayed out.

The new system is XP and the old disk is 98.
I've looked every where I can find on the net for info on the HEL with no luck.
Have any of you managed this?
And if so how????

Cheers..... Keith.

PS my expertise is in UNIX (Solaris) where this kind of thing is straight forward.

10 replies

by jdclyde

That is the first thing I can think of that would grey this out.

I have done the same thing and it worked without a hitch. When I "upgraded" to XP I just did it on a new drive and moved the existing as a slave.

by hal 9000

If you can put it back in the old unit and convert it over to a FAT32 XP should be able to not only see it but do with it as you wish.

Col ]:)

by keith

I'm in Belgium at the moment so don't have access to the system in question which is in the UK where I live. But as soon as I get back I try to convert the fat16 to a fat32. However the system is quite old and doesn?t have a CD burner to back things up, so it might be a bit tricky.

Cheers..... Keith.

by hal 9000

In the System Tools to convert the FAT16 to FAT32 without loosing any data but you did need a certain amount of free space available.

If that is a problem why not just drop in a Ethernet card and transfer the data across to the new computer with a cross over cable at least that way you would retain your data without the need to convert the drive to a 32 Bit File Allocation Table.

If you could gain even temp access to a Windows 95, 98, 98SE or even ME computer the drive could be mounted as a slave drive and read quite easily again with an Ethernet card it would be easy to transfer the data across to the XP unit.

But I have converted quite a lot of HDD's from 16 bit to 32 bit without a problem the only conceivable problem is if the drive is compressed as the Windows 98 or 98SE didn't support 32 bit compressed drives. It also saved quite a lot of space on the drives as well because you didn't get anywhere near as much slack space on a 32 bit drive as what you got on a 16 bit drive. But as you didn't mention any partitions the drive should not be compressed but if it is you will need to transfer the data across to another HDD which is formated in the FAT32 format and you will have to do it from a 95, 98, 98SE or ME computer as well.

Col

by galee01

The fat format of the old drive is not a problem. Does the bios recognize the drive correctly ? Try booting with a Startup disk and see if you can access the drive. Is this XP Home or Pro ? Is the new system connected to an office network ? Did you use doublespace/drivespace or anything similar on the old drive ?

by schuylkill

galee01 is correct - Windows XP supports FAT16, so there should be no reason to convert it to FAT32. As others have suggested, I would check to see if there are any compression utilities in place, or try networking the computers.

Someone suggested using a crossover cable to directly connect the two computers. This might work, but there is no guarantee, since this kind of connection is not defined in the Ethernet specifications. Your best bet would be to use a hub.

by hal 9000

I've just stuck a Windows 95 drive into a USB caddy {It's the only FAT16} that I have available and it is just a plain bare drive which has no partitions other than the one and no double spacing or anything like that. Whuile XP can see the drive every time I click on it I get the message that the drive is unformatted and do I want to format now.

It might be the USB interface and I way to lazy to pull a XP station apart to try it out in one but I thought that XP was only capable for reading FAT32 and NTFS drives.

Col

by tonythetiger

Is it partitioned with some third party disk management software? That might keep XP from being able to read the partition information.

by ezeze5000a

I purchased a hard drive enclosure and turned my old drive into a USB external drive, and was able to access all data on the disk.

This is a good way to recover files on a crashed system too!

by craig herberg

Putting your old disk in an external USB enclosure really is the easiest way to go. If, for some reason you can't do that, you do need to change the drive's jumpers to "slave" and go into Contorl Panel - Computer Management -- Disk Management, and select the partition, mark it as active, and assign a drive letter.

Good luck.

Craig Herberg

This discussion is closed to new replies.