7 replies
It's a toner issue.
Let the printer be serviced.
Leopold
by geilola
by ann777
If it's a toner issue, replace the toner cartridge and you'll be fine.
It may be the fuser, however. Sometimes toner gets into the fuser and creates streaks as well.
But the solid black page means that you probably have a driver issue.
I'd say reinstall the printer drivers and test. If you still get steaks, examine the drum on the toner cartridge. If you can see a line around it, then replace the toner cartridge and you should be fine. If no line on the toner drum, then take it in for repair.
by geilola
by sjclem
Hello,
I know you deleted the question, however I hope this gets to you. It's a toner or corona issue. The fuser should not cause the problem. If the toner is good, the corona may not be charging the drum properly, then the printer is just going to give you a black page. The fuser is working fine because the black is being fused onto the page. If the toner cart is good, have the techs check out the HVPS (high voltage power supply), as this could also affect the drum being charged properly. Good luck.
by geilola
by geilola
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending