Discussion Locked

Pblm of RAM recognition ?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My computer is intel pentium celeron with 700 MHZ processor and when I put a Ram of 32 MB or more it only recognizes 16 MB ,and I would like to know how to solve this problem .

Thanks
Gilbert

7 replies

by paulote

bad memory or wrong speed setting of memory in the bios....change the memory module

by oibude

All you need to do is to restart the system.If this to does not work, you to clear the cmos.

by csmith

This is usually caused by dirt in the PC.
Use a soft brush and clean the memory controller chip.
Do not use compressed air. The nozzel can generate static.
Just blow the dust with your lung power.
Also check the SIMM slot.
If cleaning does not work, check to see that you have the proper memory, and test it in another PC, or with a memory tester.
Regards, Chris

This discussion is closed to new replies.