Discussion Locked

PC continually detects wrong modem.

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi, I would appreciate your assistance.
My internal modem has been physically removed and has been replaced by an external modem.
I have removed the internal modem from the control panel and installed the external modem with a cd rom.
However my problem is everytime I reboot the PC it detects the internal modem and and then installs it.I am then required to reinstall the external modem.
Running WIN2000.
Internal modem Lucent.
External modem Diamond voice.

Is there a bios or registy setting that I can change so the system will detect the external modem every time?

Thanks in advance
Ren

3 replies

by thechas

Are you removing the modem from device manager, or from the modems applet of Control Panel?

You must remove modems from the modem applet for the deletion to stick.

I don't remember if there is an un-install for the Lucent / Agere drivers.

If so, it is a separate executable file that you will need to search for.

And, yes, you could go through the registry and delete all references to the Lucent modem.

CAUTION: Editing the registry can cause the PC to not boot.

The base modem information on my XP box is at
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum

Take a good look at the details of the modem keys to create both a file list, and search term list.
You want to both delete any keys related to the file names for the modem, and any files that are specific to the modem.

Chas

by melren

Thanks Chas,
I disabled the modem from the device manager under the My Computer Icon. I then checked the Modem applet in the control panel which had a status of "not functional". I then re-installed from CD the new External modem. Shut down and rebooted the PC and it worked.
Thanks again for your help.

This discussion is closed to new replies.