Question Locked

PC doesn't start up

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Good day
I was playing games over the weekend when my PC just froze. I had to press the power button to switch it off. But now my PC just doesn't boot up anymore. Everything seems to be fine because all the fans are running and the motherboard also powers up. Can this be a HDD problem? I also swapped the HDD but still the same problem. I have had this PC now for almost 5 years and only added new Graphics cards over the years. I have never had this problem. Please help.

13 replies

by samuel.tetteh

supernecro, the lifespan of a computer is 5years. I think your computer has spent its maximum life, so please change it. On the other hand, try changing the memories, that might work.

Enjoy

by older mycroft

You may well have exceeded the current drain that your existing Power Supply Unit is capable of sustaining.

Without knowing the details of your PC it is hard to say.

What is the make and model of your PC?
What is your current graphics card?

What did you mean by "[i]also swapped the HDD but still the same problem[/i]"?

by supernecro

I thought that it might be the HDD that has failed. That is why I swapped it. The power supply is brand new. Not sure what model my PC is but it is an IBM which is about 5 years old.
My current graphics card is a Nvidia Geforce 8600GT 256Mb as far as I remember.

by oh smeg

The problem could be the result of a Failing Power Supply. Just because the Fans work only means that there is enough Voltage to run the Fans on the 12 V DC Rail. It in no way implies that any of the other Voltage Rails is actually working.

To prove this one way or the other you need to fit a [b]Known Good[/b] Power Supply and test the system again. If it works now you need to replace the Power Supply with either a Known Good one or a new one with sufficient Power to run your individual computer.

The insides of the case could be full of Dust and other Gunk causing a Short Circuit and you need to clean it out but without introducing any Static Discharges into the M'Board or other Sensitive Electronic Parts of the computer. You can use Canned Air to blow out the insides of the case but you need to make sure that any fitted fans [b]Do Not Turn[/b] as they will generate Electrical Current which will damage the insides of the computer.

You could also have corroded contacts so look at any Plug in Cards remove and refit them into the slots that they came out of. If the Contacts are really dirty or Dull you can clean them with a soft rubber/eraser before refitting them. This includes the Memory Modules.

Probably more importantly is the computer making any Noises when you apply Power? This will be the M'Board trying to tell you what is wrong and you'll need to consult either the Computers Makers Manual or the M'Board Manual for the BIOS Beep Codes to see what they mean. ;)

Col

by supernecro

This is actually a rather new 500W power supply which I bought about 6 months ago so that I can run my graphics card. This is a bit strange.
The only problem I have now is that I don't have another power supply which generates enough power to run my graphics card to do the test you recommend. But I will try and find one.
My M'Board doesn't make any beeping sounds when starting up.
I also think that it might just be time to try and get some cash and buy a new PC.

by dmambo

Can you open the BIOS and get a list of the IDE or SATA devices? For God's sake, do a little troubleshooting before just throwing in the towel.

Boot to a OS disk or other bootable CD, run chkdsk, Use UBCD4Win and run stinger...anything. Don't just go out and buy a new PC. If that's your answer, better buy a cheap used one because you'll be going through them pretty quickly with your attitude.

by oh smeg

They are designed to stop the nasties on the Mains from getting inside the system. Quite often they can die in very short order because of a Power Spike that was generated on the mains and the PS couldn't absorb. So they crapped out a Electrolytic Capacitor.

But if you still have your old Video Card and PS I would try fitting those first before proceeding any further. You may even be able to use your Old PS to test to the POST Screen to see if there is any activity at the M'Board level.

Currently there doesn't seem to be any activity there so I would be looking at the PS as the first option because it's much cheaper than either a New M'Board/CPU/RAM Combination or any of those individual components if they are still currently available.

I suppose you could try clearing the BIOS in case something has messed that up as well. It's not common and more of a shot in the dark but at this point it's worth a try.

You could also try removing everything but the M'Board from the PS and see if it works now. You want to hear a Single Beep telling you that it has passed the Power On Self Test. If that isn't happening there isn't much point in trying anything else until you have swapped out with a working Power Supply to check the Low Level Functions of the M'Board. ;)

Col

by supernecro

My PC doesn't start up so I can't boot it with a CD... That is why I started this post!
maybe next time just read the other post also before starting to get aggressive with people. Maybe you must deregister yourself from this website because with your attitude you might just get bitch-slapped. Please don't reply to my posts again if you don't have any positive information.
Seems like you don't get it all every morning and now you take it out on people you don't even know.
Seems like you may have an ID10T problem!!!!

by dmambo

I assumed that if you swapped the HDD, then you must have at least seen some output on the screen. If you're not seeing any output at all, then I apologize for my misinterpretation.

by older mycroft

It might be a long shot but maybe you're not seeing anything on the screen due to monitor failure. ;)

by jgingrey

switching back to your old video card. If you aren't getting any picture at all, no blue screen, no video feedback at all then start small and work larger.

by rob miners

Remove the Power cord from the PSU to discharge the Capacitors in the Power Supply. Then press the Power button for 10 seconds to discharge the Capacitors on the Motherboard.
Plug the power cord back in and see if it will start. If it does replace the Power Supply Unit (PSU).

Reseat the Central Processing Unit

Faulty Fans, Dust and Grime build up on the Heatsink restricting air flow. Remove the Power cable from the rear of the System and disconnect the Video cable. I would give the inside of the case a blowout with compressed air. When blowing air through the fans make sure that you physically stop them from spinning, as they may generate power and damage something. Use an Anti-Static Wrist Strap to ground yourself or by placing the back of your hand on the Power Supply Unit and not moving your feet. This will prevent electrostatic charge from building up and by not taking this precaution it is possible that you could inadvertantly cause damage to the PC from an electrostatic discharge.

Then remove the Heatsink, giving it a thorough clean and reseat the CPU applying new CPU grease. If the Fans spin freely when you give them a spin they are probably OK. If there is resistance replace them.

Clean the golden edge of each memory stick with a soft rubber/eraser, remembering not to touch the golden edge of the memory stick. Check with one stick at a time, remembering to disconnect the power from the PC as you replace them.

Also check the Capacitors around the CPU for swelling or bulging.

This discussion is closed to new replies.