7 replies
by dmiles
by mheffner
by thechas
Yes the PC100 DIMMs will function in a PC66 system.
However, some older mother-boards are not able to address some of the newer memory chip structures.
The only way to find out for certian, is to install the new memory. Also, some mother boards require that the larger DIMM be installed in the first DIMM slot.
I have several Socket 7 mother boards. Some of them can work with any DIMM that I install. Others are very picky as to the chip and structure of the DIMM.
If it is an older mother board, it probably has a maximum DIMM size limit of 128MB or less per DIMM. I have seen motherboards with 3 DIMM slots, but if either of the first 2 DIMMs are larger than 32MB you cannot use the third DIMM slot.
by mheffner
by centaurus
yes you can, but verify the dimm voltage, older pc66 dimm?s use 5v and pc100 normaly use 3.3v, you can set the dimm voltage in the motherboard jumpers, make sure you use the correct one.
regards
by mheffner
by mheffner
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending