Discussion Locked

PC66 RAM shows a fraction of capacity

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just received new PC66 DIMMS for an older AT class MB (AMD K5-166 Processor). I have both 32MB and 64MB sizes. The 32MB registers as 8MB and the 64MB registers as 16MB. I can insert either DIMM in a PC100 MB and they show full capacity. What am I doing wrong?

7 replies

by rctv

I ran into a similar situation with an Intel VX chipset MB. Had a 166 processor also. It had 168 pin sockets but a 64 meg would only show 32 meg. Tried various settings in BiOS to allow large dimm support but didnt help. I received an answer from Scott Meuller, author of PC books, he said when that chipset came out, 168 pin mem was very new and he thought possibly not completely supported. The VX chipset is supposed to support up to 96meg?, possibly 128 meg, but couldnt get this one to do it. Running win95.
Also, these new mem chips being sold, the really cheap ones, are very picky about which MB's they will work with. The mid priced ones work with about any MB. I know this is not much help, just my experience.

by drdon

Check the book for the motherboard. It is very possible (and probable) that the DIMM slot has a limit to the amount it can read.

by jctech

First thing I did was check the Mainboard Manual. The board is capable of handling up to 256MB.

by jctech

I have the manual for the mainboard (more of a generic user's guide) and it claims to accept PC66 DIMMS.

This discussion is closed to new replies.