3 replies
by thechas
As long as you have a free PCI slot, and available resources, it should not be a problem.
You may need to try different slots for the new card to avoid resource conflicts.
I am using a Promise Ultra ATA 100 card along with the on-board IDE controller on my system. I realy enjoy the higher data rate of the ATA100 vs ATA66.
You can also install a SCSI card if you desire to use SCSI drives.
Watch your power supply rating as you add more drives. You may need to step up to a 300 or 350 watt supply to power everything.
Your next issue is going to be where to mount the extra drive(s). You may need to use a 5 1/4 to 3 1/2 convertor to mount a drive in an unused bay.
Depending on your case, you may be able to fabricate brackets tomount the drives below the existing internal bay.
Watch cooling vents and heat build-up as some new drives heat up a bit more than old drives.
Chas
by daz'n'ash
Thanks Chas. I have plenty of space to mount the drives, I have at the moment one extra case fan for sooling with the intention of adding more soon. I have an ATX case and will add a 6 bay braket to hold the extra drives.
Thanks again for taking the time to answer my question.
by daz'n'ash
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending