Hardware

Ask something
Discussion Locked

PCI MULTI I/O CARD ADDITION COM3 com4

0 helpful
2 replies

by samsonka

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i use sco unix i would like to add pci multi i/o card as COM3 OR COM 4.The problem is unix is failing to recodnize this card.Please give the procedure on how to add this card on the unix server.The existing serial card on server is occupying com1 and com 2.

2 replies

by vinnyd

SCO Unix has built in support for Com 1 and Com 2.

To use a multi i/o card you need to get the SCO version drivers that will work for that vendors i/o card.

The SCO Unix system kernel has to be re-linked with the driver for the Multi i/o card.

by samsonka

Please can you provide a list of cards which are compatible with scounix.THE I/O CARD I AM USING APPLIES TO DOS AND Linux.I WANT A CARD WHICH I CAN FIND DRIVERS FOR.It seems i dont have the sco version drivers for this card its written Netmios Technology Nm9835cv f1g22-000 0110.I TRIED TO LOOK ON THE INTERNET I COULD FIND ANYTHING.Your urgent help is greatly appreciated.

This discussion is closed to new replies.