Discussion Locked

Phto Cartridge C1816A & HP 610C Printer

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a hp 610c printer. I bought a C1816a Hp photo cartridge on the advice of the shop. After insertion into the black slot, the carriage would not shift to the end after I close the lid. If I restart the printer it goes to the end. But it would not print. When I try to align the cartridge the printer starts, brings out the paper and a window comes on the screen with
There was an error found when printing the document :"Alignment" to LPT1:. The device is not connected. Do you want to retry or cancel.
I am running win2k system. I have installed the Photo cartridge on the preferences list.
Thank you for your time and patience

4 replies

by paul d. masley

It appears that you may have a bad cartridge. I have several 610's in my office, however, I have not attempted to put a photo cartridge in one. The 1816 number does not sound right. The standard black cartridge should work ok for photo printing, you should only need to change the color cartridge. Both cartridges are about the same size. make sure that you have them in the right slots.

by alwaysshariff

The colour cartridge(s) comes in Black and Colour. They go in the individual slots. But the Photo Cartridge C1816a, is recommended by all the dealers, goes in the black slot. If I keep the old clour cartridge which is usable in the colour slot it works! But that seems to be wrong somehow;-) Thanks for your trouble Paul

by alwaysshariff

This is a bad advice by the shops. They recommend that the C1816A Photo cartridge for the 610c printer. But you have to use that cartridge with the colour cartrige in the colour slot, which they did not specify. That is written in small priont in the top of the box.

This discussion is closed to new replies.