Discussion Locked

Picking the right CDR/CDRW

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Have PIII@450, win98, 196K memory on M6TBA mother board, has DVD. Looking for CDR/CDRW with plans for mostly audio purposes. Have USB ports available. Main question is how do I know (1) if my hard disk is sub 15MS access time, and (2) if I have a sustained transfer rate of at least 1.5MBS. Open to any suggestion on internal/external, SCUSI driven or ??????

7 replies

by ebob

Assuming that you do not currently have a SCSI controller, then IDE/EIDE internal is your best general choice. In general you have your HDs on the primary IDE controller, and your "CD" type devices on the 2ndary. You probably already have your DVD as the "master". Configure your CD-RW as "slave". Or swap roles with your DVD, as you prefer.

As for picking ther right drive, you want the highest speed with the biggest buffer that you can afford. Everything else being equal, pick the unit with the bigger buffer. There are lots of great values in IDE CD-RW drives at the moment. Try to stick with "brand names".

by vinnyd

I find that the software that comes with the drive the KEY FACTOR.

Adaptec Easy CD Creator is the best that I have seen both for Audio and Digital media creation.

by davemurgatroyd

Further to Answer 1 - if you mainly intend copying from Cd to Cd, you need to place the DVD and CDRW on different IDE cables, but if you are creating CDs on a hard disc first connect the HD and CDRW on different channels. The source and destination ideally need to be on different IDE channels for best performance.

This discussion is closed to new replies.