Discussion Locked

Plotter Problem

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a problem with an HP Designjet 750c, its showing the following error "switch off plotter, check cartridge path', i have tried to check the path but couldn't find anything obstructing what could it be?

1 reply

by paulp

This is what HP says:

Turn off the printer. The drive roller cannot move or the roll feed spindle cannot freely rotate. The printer may be jammed with media. Check the media path and clear it if necessary. Then, turn on the printer.

This discussion is closed to new replies.