Question Locked

PLS HELP! How do I restore pc to manuf condition after replacing hard drive

0 helpful
26 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to restore a friend's computer (HP Pavilion a6244n) to manufacturer condition but she had a new hard drive put in it 8 months ago (WD5000-AACS-00ZUBO). Her computer kept rebooting itself and then coming up with an error screen that was very grainy. I ran diagnostics on all the hardware and it all passed with flying colors. She has Vista and the pc is only two years old with mild use. She has been without it for a week.

When I try to restore back a month, it says there are no images created and system restore does not want to work properly. Now I cannot even get it to boot in normal mode... Thank you for any assistance you can provide!!!!

26 replies

by thumbsup2

To restore back to original condition, you'll either need a set of restore disks, or there are instructions in the owner's manual to press a certain key combination at boot up which would restore from a hidden partition on the hard drive.

Since the drive has been replaced, you'll have to locate the original restore media which came with the computer or contact HP to purchase another set.

by resacross

When the retailer set up the computer with the new hard drive for my friend, they did not create a restore disk. I tried to go in and create one but it failed. When I try to restore to original condition, this fails as well.

by older mycroft

If no restore media has ever been present, and the new HDD was fitted under some form of warranty, there should be a hidden System Restore partition on this HDD.

Have a look in the owners' manual for whatever key-combination is likely to invoke this partition.

You press this key-combination immediately after powering on. It should reinstall the Factory State.

Barring that possibility, some more details about the problem would be nice - maybe we can get the existing install to work again. :)

[u]*Afterthought:[/u]
I've seen [i]HP[/i] systems with Vista on them, where you sometimes get access to the Factory Restore by means of one of the options within the Safe Mode menu screen!

Try tapping F6 repeatedly on start-up - see if it gives you the Safe Mode menu.

by resacross

I do not have an actual cd with Vista on it; I only have a recovery cd for my personal computer. "My" laptop, also an HP Pavilion, has Vista. I tried putting in "my recovery cd", but her computer would not recognize it. I just spoke to her, and it would appear that the Geek Squad that put in her newer hard drive, took the recovery cd with him. That was 8 months ago... HELP?

by balge

hi
Assuming this is a genuine bought new PC -
best bet is to get in touch with HP and get a system DVD from them. If you are convincing they wont even charge you, otherwise about $30?
Then a repair install should get you back
They are pretty good at support, give them a shot
Might be worth trying to boot a live CD while you wait for the post though
cheers

by older mycroft

That way there's no 'cost' involved for the time being (not until June 2010 (or March 2010 when it gets 'uppity')) AND there'll be no problem with having a valid COA.

by tintoman

Windows 7 RC does seem to work like a dream so far, in fact it was the first time I have ever installed an OS and EVERYTHING worked from the off! didn't even need to install me printer!

by older mycroft

Only thing W7 did FOR ME was to update the driver for my Nvidia 8800GT when it became available. I've been running it since HOUR 3 of its release and had zero problems, other than occasionally trying to figure out where Redmond had decided to hide stuff this time.

Windows 7 RC is definitely uncannily helpful for a M$ product. - Hope I've not just tempted fate!! ;)

by resacross

I tried putting it in the system but it said it cannot be restored from this disk... It looks like I have got to obtain the original disk for HP. I don't know what else to do... When it tries to restore, the Administrator login has been disabled somehow...

by resacross

sorry... cannot even boot to safe mode. I downloaded a torrent version of vista from http://laptop-driver.blogspot.com/2009/05/vista-recovery-disk-free-download.html and tried to boot to it... to no avail. If I download a trial of Windows 7 to a DVD, can I put that in the pc? ... to help with the repair? I really want to get the pc back to manufacturer condition as it came with other software and all the drivers... grrrrrr... thanks guys!

by older mycroft

I'm just a wee bit worried that you can't get the rescue disc to boot.

If you cannot get the optical drive to boot anything, then creating a Windows 7 RC DVD won't be of much help if you can't boot from the optical drive.

How did you run the diagnostics software that you originally mentioned?

Do you happen to know WHY the original HDD needed to be replaced? Obviously it didn't work but for 2 HDDs to cause problems in less than 2 years is a bit odd.

As to Windows 7 RC - it won't help you to restore Windows Vista onto this system - Windows 7 is a completely different operating system that looks like Vista without the Vista problems, but it's NOT Vista. What is the other software that came with the HDD?

Chances are, most of it was either bloatware (ineffective needless rubbish) or utilities that can be replaced by downloading from the internet once you have an oprational OS installed.

As for DRIVERS, you won't need to worry about any of them - Windows 7 came complete with drivers for everything I've got fitted.

by resacross

The geek squad took it with them! Trying to retrieve one from Best Buy but they are not very cooperative. The diagnostics were the ones that came on the Vista system... in recovery manager I think. all the hardware checked out fine. I am not even sure the original hard drive was bad; perhaps just needed restoring, but I wasn't around at that time and my friend is fairly computer illiterate... she really doesn't remember much and trusted best buy to repair everything. She did not know to ask for the recovery cd when they were done.

by older mycroft

Have you tried pressing F11 repeatedly to invoke the Recovery Partition ?

Check this link for methods of getting a Rescue Disc from [b][i]HP[/b][/i]

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_track_link=ot_faqs/top_issues/en_us/bph07143/loc:14&lc=en&dlc=en&cc=us&product=3552345〈=en

Also, any HP systems of recent years that I've ever seen, usually prompt the user [b]WHEN FIRST SWITCHED ON[/b] - to make a Recovery Disc. If the user chooses not to do so, the system then repeats the prompt at staggered intervals over a fair few months.

Maybe your friend has made a Recovery Disc but is getting confused what it actually is and doesn't remember she's got it ?

by resacross

I put the pc's original HDD back in to see if it would boot and it said the HDD failure is imminent and recommended backing up data. The interesting thing I am finding, which makes me wonder if any other hardware is going bad, is that with both HDD's, the screens are very grainy and inconsistently pixeled making it actually hard to read... I am trying to restore the original HDD now to see if it will work, perhaps even allowing me to create a recovery disk. Any idea why the screens would be so pixeled??? and grainy?

by resacross

I ordered the system restore dvd's. Tried to repair and even restore to manufacturer condition... Even when it looks like it is working when it comes up to the final reboot, it fails and asks the usual do I want to start in Normal Mode. I cannot get it started in any mode.

I even took the drive out and formatted it incase it had a trojan or virus... to no avail.

I even changed the drive letter on the main drive... no avail.

the harddrive in the computer now is not the original from HP (which was a Seagate). Best Buy replaced it a year ago with a WD. Could this be why the restore is not working?????

by rob miners

Order the Recovery DVD and in the meantime try this.

Follow the steps below with the System started in Safe Mode with Networking. Keep tapping the Function Key F8 as the System starts up.

Click Start, Run type msconfig and press Enter.

Now if you have the Configuration Utility open.
Configure selective startup options
In the System Configuration Utility dialog box, click the General tab, and then click Selective Startup.
Click to clear the Process SYSTEM.INI File check box.
Click to clear the Process WIN.INI File check box.
Click to clear the Load Startup Items check box. Verify that Load System Services and Use Original BOOT.INI are checked.
Click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
When you are prompted, save the settings and restart the PC.

If it is working in Normal mode re-enable one item at a time until you find out what is causing the problems.
When you have it sorted out re-run the Configuration Utility and in the System Configuration Utility dialog box, click the General tab, and then click Normal Startup.

It would be good to know the Stop error message.

by the 'g-man.'

I would have a guess and say the last set of techs had exatly the same issue. The quickest fix was to get a new HD, install Vista, hook up the old HD and copy the information back to the new HD.

by resacross

Just to update based on the last few messages, the retailer set up the computer never giving the owner a restore DVD (she would not have known what to do with it anyway). You description above regarding the last tech who installed the HDD may be exactly right.. hence why the owner is still having problems. Interestingly, I after scanning the owner's old HDD found she had a keylogger (trojan) running on the machine... and I am almost certain she would not know it. This brings up some interesting questions??? Her old HDD seems to be running fine. I may just try to put it into the pc and restore from the old HDD.

On the newer HDD as I tried to restore to manufacturer condition, it would look like it was working. When it tried to reboot it would give the message that it was restarting for the first time... then a screen would come up saying it did not reboot properly the last time and asks if I want to start in Normal mode. I said yes.

Then a screen would come up saying Startup Repair cannot repair this computer automatically... One of the problems listed under details was... failure during setup.

I think I will go ahead and order the recovery DVD's since the computer will not let me create one. In the meantime, I am going to try and see if the old HDD will restore...

I am so grateful for people like all of you who truly desire to help those who are less technical and taken advantage of. This poor woman has spent so much money on this nice computer and it still is not working. I am determined to help her... and will let her know that there are wonderful people out there with good hearts and a desire to help others. THANK YOU !!!!!!!!!!!!!!!!

by computechdan

Don't forget
If ANY of the posts made by TechRepublic members, have solved or helped in solving the problem, please click on the answer and Mark as Helpful so that others may benefit as you did.

by resacross

In desperation, I just ordered the copies which infuriates me because Best Buy should have left the cd with the owner. Now she is having to pay for them on top of all the money she has spent on purchasing/repairing this system. I am so grateful for your help. Thank you for your time!!!

by balge

hi
I've managed to get disks free from HP under similar circumstances, if you try their customer service direct and ask nicely you might get them free... worth a go..
cheers!

by resacross

Grrr..... I am beyond flustered. I so hope you might be able to help. I recovered the computer (took several times). Now it is still a grainy screen and after doing all the windows updates, it rebooted and said it could not find the winload.exe file in system32. I can't figure out why the display is so grainy and pixeled. I am actually now trying to restore to another hard drive (an older one I had on hand) just to see if the recovery will work, and if the hard drive is the problem... Any suggestions? The HP computer is only two years old...

This discussion is closed to new replies.