Discussion Locked

Poor Internal Communication

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am working on a Dell Dimension P133t and attempting to upgrade the processor from 133MHz to 333MHz using an evergreen Spectra 333 chip. This uses AMK6/333 processor. From the documentation the motherboard into which I am atrempting to install seems to indicate a good match, however, post installation inclusive of Mr BIOS bios software, the PC seems to communicate badly with devices on the PCI bus.

I have not had a chance to check ISA thoroughly to see if this is affected either. Evergreen have suggested re-installation of the old processor with the new BIOS to see if that is the cause. Otherwise, the only other thing it could be would be the processor. The only other alternative is to install a manufacturer BIOS update to see if this works with the new processor.

Does anyone have any other ideas, as I have no specs on the Dell motherboard and they aren't able to provide it either which makes things difficult.

Help. Its X-mas I am on holiday and having more support nightmares

Thank you

5 replies

by al

No disrespect, but I had done this and that is what I was asking for assistance with. The information on their website is good for understanding your way around the motherboard, but what make/model of motherboard is it. Answer it is an Endeavour motherboard. the solution, was to re-install OS with little or no devices (SVGA card only). Install to ME standard and reinstall cards with shared slot used for modem. The reason for this is there is no busmastering on the shared slot.

by dmiles

Was the 133 a AMK6 processor or Intel Pentium,this will determine whether or not it is compatible with the motherboard,you can not switch the two.Check to see what motherboard you have and then try referencing www.tomshardware.com for mb info.
Check the documentation that came with the processor and see if it mentions that you have to change the internal or external bus clocking.

by al

Its a processor upgrade - and is definitely compatible with the mainboard - I have had it working - which would indicate that the processor is compliant with mainboard otherwise nothing would happen and I wouldn't have been able to establish poor internal communication - that would indicate NO communication at all!!!

This discussion is closed to new replies.