Discussion Locked

power is not passing to all the ports

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

DEAR SIR ,

I M HAVING MOTHERBOARD OF ASUS7PRO & it suddenly stop working & when starting no warning beeps or no sound is coming & cpu is not starting,even the power is not passing to hard disk & cd rom, but the power indicator is on the mother board near the AGP card.

I HAVE CHECKED THE AGP CARD & MEMORY ALSO THEY ARE OKIE.

Please can u advise what could be the problem.

I have checked all the settings on the MB & everything is okay.

Many thanks for your kind co-operations.
Thanks & Best Regards

Ramwani Mahesh

5 replies

by thechas

I am making the assumption that this is an ATX style mother board / power supply.

Check that the power switch cable from the front panel is seated to the mother board.

If so, try placing a jumper over the 2 pins that the power switch connects to. It may just be a bad switch.

Make sure that the cable from the power supply is fully seated to the mother board.

It is also possible that the power supply itself is bad. If you can borrow a spare power supply, try swapping out the supply.

If the power switch is good, and the system will not power with a known good power supply, you either have a motherboard problem, or a corrupted BIOS.

You can try removing the cmos backup battery, and setting the jumper to clear the cmos memory. Attempt to boot.
Shut down, and replace the cmos battery, and set the jumper back to normal.

Best Wishes

by still_learning

You may also want to reseat the Processor. If this does not help, it most likely is that the processor or system board has failed. Hope this helps.

This discussion is closed to new replies.