Discussion Locked

Power-off button

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I know someone with an Intel Board or at least that's what she says. On the top left corner ar the BIOS POST screen(first boot-up screen) says, "DR742E BIOS REV. 1.03. The problem is that it won't shutdown entirely. I activated the ACPI Bios in the BIOS Setup Screen and the Power Management but when we select Shutdown from Windows, all the board do is a restart before I tweaked with it a little. Now it just goes to a black screen and the tower remains on. At least in this way, it is supposed to turn off after pressing the power button for 4 seconds and it should power-off. Well, it doesn't. We have to press once, count 1 second, then release and count another second before holding for 4 seconds for power-off. I want to know if anybody has expeerienced this and of course a solution. This is the first time I've seen this and the only thing that comes to my mind is that the motherboard is somehow damaged. Anybody?

7 replies

by thechas

I don't think you have a MB problem at this point.

I would go through the shutdown troubleshooting steps for the installed OS.

There is a good step by step guide at www.aumha.org

You may need to update drivers, or adjust IRQs to make thingswork.

by javierrosado

The guide is great although I do have a motherboard problem. The guide will still be useful for future problems. Thank You.

by javierrosado

Few words, no points, sorry. Try to dedicate more time to your answers. It's too obvious anyway.

by mdelyea

From the description of your problem I would assume you are using win98se. If this is so you should know that se had a lot of shutdown issues with certain motherboards. One possible solution is to start regedit and go to HKEY_LOCAL_MACHINE_SOFTWARE_MICROSOFT_WINDOWS_CURRENTVERSION_WINLOGON. Click on EDIT then NEW then STRING VALUE. In NEW VALUE #1 in the right panel, overtype it with PowerDownAfterShutdown, exactly as shown. Click on MODIFY. An edit string window will appear. Type 1 and click OK. Close regedit. This change may allow windows98se to shut down correctly on some hardware configs.

by javierrosado

You answer is technically correct and could have helped in other situations. In this one, however the motherboard is bad'.

This discussion is closed to new replies.