Question Locked

primary and recovery(backup) drive switched what do I do?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
The C:\ drive on my home computer with 100 gb has been made the recovery drive, and the H:\ drive,a partition with 4.44 gigabytes has been made the primary. The computer always says system memory low so I cant install new programs or run programs that require lots of memory. I dont even have enough memory to do a system restore. The computer, I think, boots of the H:\drive and that is what is causing the problem. The C:\drive is partically still empty, It still has 75 gb of free space. Is there anything I can do to resolve this problem. Please try to decipher what I am trying to say and help me. Thanks

4 replies

by ghostbrowser

Fdisk may help this is a dos command
So type fdisk at the prompt and try
setting the 75 gigabytes partition active
then use the esc key to exit
If you don't under stand please tell us what is on the screen when your pc ends its start up

Hope this helps

by vinitogupta

hi,

you said your primary partition is only 4.44 gigs and which os you are using and did you made sure you have enough space on the primary partition.
if you are on low space on primary partition it will give you system memory low because when you dont have enough space to run the apps if uses the temporary storage which is your memory (ram).

thanks

by sgt_shultz

have you tried moving the swap file to the larger drive. do this in Control Panel System Performance Virtual Memory or look in Help for your os. you will have to Set the small drive virtual swap file size to zero and then put it on your big drive (defrag first) i think supposed to be size of 1.5 times your ram. remember to say 'set' or it won't take

This discussion is closed to new replies.