Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
have tried to set up my hpdeskjet 722c,but keep getting error messages:#1.attempting to send data to the printer but the printer is not responding.#2.the printer service you are trying to perform cannot be performed because it has lost communicationwith printer.i have downloaded an installed the latest drivers,changed the cable,trouble shooted on the hp web site.it doesn't matter if i try it on one computer or another.maybe the printer itslf?
7 replies
by loydster
Those deskjets are sometimes tricky.
I would go into the BIOS, and check out the settings for the Paralell port. Try setting it to bi-directional if it isn't or some of the other settings. ECP EPP that sort of setting.
Deskjets really need to talk both ways to the computer.
Poster rated this answer
by loydster
Those deskjets are sometimes tricky.
I would go into the BIOS, and check out the settings for the Paralell port. Try setting it to bi-directional if it isn't or some of the other settings. ECP EPP that sort of setting.
Deskjets really need to talk both ways to the computer.
same answer as first one.from same person
Greetings,
Make sure that you are using a "bi-directional" cable.
Maxwell
worked all along.had new mother board installed though
This question was closed by the author
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies