Discussion Locked

Printer not grabbing paper

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a desktop printer that jams (or thinks it's jamming) almost every time I try to print. The PC is communicating with the printer. My guess is that the mechanism that feeds/grabs the copy paper needs adjustment. I can get it to work occasionally if I keep adjusting the paper in the feeder, but in those cases, it advances too far and part of the copy is cut off. Is there a simple way to fix this?

2 replies

by thechas

Simple, maybe.
Easy, no.

How mechanically inclined are you?

What I believe you need to do, is to take the printer apart and clean the feed rollers.

Start with a lint free cloth and plain water.

Once you have the rollers clean, gently rough up the rubber surface with the green grade of Scotch-brite.

While you have the printer apart, it might be worth it to clean the ink pads and the intersection of the paper and ink paths.

I use a cleaning wipe that I picked up at Office Depot.
Depending on the ink your printer uses, either water or isopropal alcohol should clean up the ink.

Chas

by ligurza

You might want to have the "page seperation unit" looked at. It is a common problem on HP Laser printers.

This discussion is closed to new replies.