Discussion Locked

printer problem

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i have an HP695C printer and i also installed the HP690C series software drivers. a problem occured when i am printing a document. the computer keeps giving out an error message -paper mismatch- i checked the lever to see if it's in the right position. but it keeps giving me the same error message. what should i do?

13 replies

by jwilczyn

Check your printers setting in your PC.
You have a default paper size e.g. letter.
You created a document in the letter size and now you are trying to print it on the A4 paper size, which you have in your printer. Then you have this error - papermismatch.

by iori0083

i have been using the hp690c series drivers for about 3 years. this is an unusual occurence because this has been the driver software i have been using for the printer. when i used the hp694c driver found in my windows system, it never showed any malfunctions.

by cummins_comp

kindly switch off printer remove black coler or colourd ink catrige from the priner holder load pager print test page by pressing on/paper button once.if it print eliminate on catrige as faulty.
jacob .kabange@yahoo.co

by cummins_comp

kindly switch off printer remove black coler or colourd ink catrige from the priner holder load pager print test page by pressing on/paper button once.if it print eliminate on catrige as faulty.
jacob .kabange@yahoo.co

by kmdigit

Hint : There is Possibilities that Sencer Switch is not functioning which controls the Lever.

by kmdigit

Hint : There is Possibilities that Sencer Switch is not functioning which controls the Lever.

This discussion is closed to new replies.